MILLS AND BORERS:

New arrivals include:

Bridgeport Vari- speed Turret Mill- ex Aerospace.

Tom Senior mill with S type vertical head

Europa Centurion CU-5 Ram type Mill in excellent condition.

XYZ 2000 VS Turrert Mill


XYZ 1500 VS TURRET MILL


KRV 2000 Turret Mill
from London Musical Instruments Ltd.

V.good condition.

Bridgeport turret mill.1off J belt head Ref 1


Choice of three:

Tos FNK 25 Turret Mill....(Ex Formula one team Caterham) , Ex-toolroom & jobbing shop

See below :







Europa Centurion Ram Type Universal Mill Model- CU5. Serial# 96120055PC. (1997).In Excellent condition with three axis Newall DRO & tooling.

The EUROPA CENTURION range of heavy duty high stiffness, ram guideway configuration milling machines. Combining the features of universal, vertical and horizontal milling machines, the universal compound swivel head gives the advantage of being both suitable for conventional milling operations as well as handling more complex operations such as machining awkward angles.

.
Table size1 1635 x 460mm

Longitudinal travel 1300mm
Vertical travel (knee) 440mm
Cross travel (ram) 650mm
Min. spindle nose to table surface 40mm
Swivel angle of milling head any angle
Spindle taper 50 INT
Spindle speeds 27
Spindle speed range 30-2050 rpm
Longitudinal power feeds (inf. variable) 10/1000 mm/min
Cross (RAM) power feeds (inf. variable) 10/1000 mm/min
Vertical power feeds (inf. variable) 5-500 mm/min
Longitudinal rapid feed rate 2800 mm/min
Cross rapid feed rate 2800 mm/min
Vertical rapid feed rate 1400 mm/min
Spindle motor 7.5 kw
Maximum table load 1800 kg
Overall dimensions 2010 x 2621 x 1950mm
Approx. nett weight 3500 kg
Voltage 415v/50Hz/3phase

POA
Ex- Aerospace Co
Excellent Bridgeport vari-speed with Crome Slides, excellent head & very little wear on slides. C/w Two axis Newall DRO.Align Power feed motor to X axis.With Vice , clamping set and tooling.
Main Table 1220mm x 230mm. Traverses: X = 914mm. Y = 305mm. Z = 406mm. R8 Spindle. RPM 60 - 4200. Serial No. J311715
POA
Tom Senior mill with 'S' type vertical head.
Table size1: 28" x 6 1/2"
Longitudinal Travel: 15 1/2"
Cross Travel: 5 1/2"
Vertical Travel: 14"
Spindle Taper: 30 ISO
Spindle Speeds: 50 to 1660rpm
Power Feed to Table (Long)
Clarkson auto lock with collets & cutters
£750

Elliot Universal Milling Machine- Ex-University:

Model 00, Turret Type Mill with Horizontal Abour, Table 710 x 190mm, 30 International Horizontal, 100-1700rpm.
SOLD

1off Bridgeport turret Varispeed mill, with quiet head, 2 axis Mitutoyo DRO 42" Table, longitudinal & rapid feed Dividing head, vice, coolant, Clamping set & tooling. Sold
AJAX NO.1 (Ex-University) Universal Milling Machine, Table size1 43 1/4" x 9 1/2", Speeds 48 to 1500 rpm, 40 INT Taper, Complete With Vertical Head, Power and Rapids to X Y and Z Axis, Swivel Table, Horizontal Arbor & Support, Coolant, Motor size1 4 HP Sold

XYZ 1500 VS TURRET MILL, Ex Lola Racing serial no. 6665, table size1 1070mm x 230mm overall,
In very good condition.Fitted with Acu-rite MillMate XY digital readout and Abwood 150mm machine vice.
POA
XYZ 2000 Turret Milling Machine with Newall D.R.O
3HP VARIABLE SPEED HEAD with 2.25kw drive motor
Speeds 75 – 4200 rpm
50” x 10” (1270x254mm) TABLE
Longitudinal travel – X axis with power feed... 750mm
Cross travel – Y axis ....380 mm
Knee vertical travel – Z axis.......406mm
Quill travel.........127mm.........POA
Serial# 10239
YOM- 2000
POA
Aciera F4 Universal Mill complete with Tooling. Table 600 x 250 mm. In very good condition.
Longitudinal range : 400 mm
Transversal range : 190 mm
Vertical range : 450 mm
Spindle : ISO 30
Horizontal spindle speed : 50-2000 rpm
Vertical spindle speed : 50-3400 rpm
Feed rate : 12-360 mm/min
Fast travel : 1800 mm/min
Power supply : 3x380V/50Hz
Dimensions (H x W x D) : 1745 x 1800 x 1155 mm
Weight : approx- 900 Kg
SOLD
Huron NU4 Universal ram head 40int milling machine with Three axis Heidenhain Dro Serial # 13144 Feb '72.
Table size1 1430mm x 460mm in good working order. Can be seen under power.
SOLD

Correa 'F2UE' Motorized Ram Type Universal Milling Machine with range of tooling with 40 int

Table. 1200 x 305mm

Longitudinal travel = 950mm, Table cross travel = 280mm,Vertical travel = 475mm.

ISO 40 spindle. 40 to 1800RPM.,

Serial No. 5104928
Sold Video
Choice of three Tos FNK 25 Turret Mills:
A TOS-KURIM FNK 25 Turret Milling Machine, Serial No. 22741 (1977) with Fixed Speed Head, 1250 x 290mm Table, ANILAM Wizard 411 2-Axis DRO, Coolant & Lighting
Ex Formula one (Caterham).
Also 1 off Ex toolrooom & 1 off jobbing shop.
From £1500

1off Bridgeport J belt type head Turret Mills 1-2hp First with with 6" riser block 42" Table with Anilam Wizard 2axis dro.Longitudinal feed to table, vice, clamping set and tooling.(No coolant)


ref 1

£1950



XYZ Model KRV 2000

Table 1270 x 254mm, Traverses XY: 762 x 406mm, Knee Travel 406mm, Quill travel 127mm, Spindle Taper R8, Spindle Motor 3HP, Spindle Speeds up-to 4200rpm, 6" Vice, Low Volt Light, Align motor Power Feed to longitudinal , clamp kit, coolant, ACU-RITE III 2 axis DRO ref 3

£3,750

Huron J2 Ram Type Universal Milling(ex-toolroom) Machine 1982 in excellent condition:

Specification:

  • TABLE 1050 MM X 350 MM
  • UNIVERSAL MILLING HEAD 40INT
  • SPEEDS 30-1680 RPM (18)
  • POWER FEEDS & RAPIDS IN ALL DIRECTIONS
  • 3 AXIS SONY DRO
  • COOLANT
  • LIGHTING
  • NEW 1982

ref 4
SOLD
Bridgeport J-Belt type head 1-2HP Turret Mill with 2 Axis DRO, Align motor longitudinal & rapid feed to 42” table.,Coolant Tray, Machine Vice,,Clamping set.Other Tooling Possible.

ref 6

sold
KRV 3000 Heavy Duty Turret Mill 48" x 12" Table
C/w Align air operated draw bar. 8" Riser Block 3 Axis Acurite DRO
Rapid Traverse to Longitudinal and Knee. Coolant facility, One shot lube, Lo- vo-lite.6" capacity vice Drip Tray.
Excellent vari-speed head.
X-Travel - 863mm
Y-Travel - 400mm
Z - Travel - 406mm
Main Motor - 3.7kw
Spindle Speed max- 3600 rpm

ref 7

Now Sold
Harrison 600 30 int universal mill, with a 1metre long table, crossfeeds, coolant. horizontal arbor & support, lo-vo-lite & collet head
Longitudinal traverse 380mm, cross traverse 255mm, vertical traverse 234mm...............

ref 8

Sold

Harrison 600 30 Horizontal mill 30 int with 8" x 30" table, 15" of longitudinal movement, 6.5" in traverse and 14" vertically.Table has auto feed, with auto re-cycle facility.Spindle speeds 45-1000.
With spare 30int arbor
Sold
UCIMU: D`Andrea TS3 50 INT Boring & Facing Head, Not Boxed

BORING AND FACING HEADS ON 50 & 40 INTERNATIONAL TAPER, COMPLETE WITH VARIOUS BORING TOOL SETS, USED ON MILLING MACHINES, HEAD DIAMETER 50MM, MICRO-ADJUSTMENT GIVES A FEED OF 0.02MM ON DIAMETER PER DIVISION. TAKES VARIOUS size1 BORING BARS EITHER PARALLEL OR PERPENDICULAR TO AXIS

Also various other milling accessories.......................

ref 9

POA
Cincinnati Vertical Milling Machine, Model 4V, Heavy duty mill for moving metal with long traverse. Serial No B5508-9, table 2000 x 410mm, long traverse 1250mm, cross traverse 380mm, vertical traverse 400mm, spindle speeds 18 – 1300rpm, spindle taper 50 ISO, feeds 5/16 – 60 inch/min. Some tooling & large drip try (not shown). Footprint: W 2.4m X D 2.3m x H 2.3m

ref 10

POA

TOS- FNK 25heavy duty turret milling machine. Table 1250mm x 250mm Longitudinal table traverse 800mm Cross traverse 370mm vertical traverse 450mm Spindle 40 INT 16 Spindle Speeds 56-4500 rpm Weight of machine 1700kgs This machine is in good working order and can be demonstrated under power. Various accessories available to go with this machine.

ref 11

sold

A range of various large & small workshop/garage benches. Vices available......

ref 14

POA

A range of various large & small tool cupboards with adjustable shelving, 3 & 4 swivel trays and 2 drawers on each side of cabinet

ref 15

POA

30,40,50,Int. Auto-loks, stub-arbors .T-bolts, cutters.

ref 15a

POA

WDS Marlco Horizontal & vertical 360 degrees index head. Reversible jaws. Excellent condition

ref 16

£395

Various milling equipment accessories from..... ref 17

£20

Eme mill self centring vice jaws. width1 of jaw 4.3/8" x 3 1/8" opening 7½" x 8½" base in perfect condition.

ref 18

£500

Milling accessories: Tilt machine vices, swivel vices, rotary tables by Leon Huré 40cm, & Jones & Shipman 12"dia. Dividing heads by Rudolph Carne 8inch c/h. Parallels 18x4x1½

ref 19

POA

back to top